Center Stand Installation
Mounting Procedure for the Center Stand
An Aluminium Alloy Centre Stand - helps take the weight of the solar panel more evenly than a side stand
Center Stand
To mount a center stand on a bicycle, you can:
Clean contact surfaces: Before mounting, make sure all contact surfaces are clean.
Detach and Shift Cables if any: Before mounting, also make sure that no delicate eelectrical cables interfere with the mounting plate or the stand. If there are any cables interfering, cut the cable ties to detach the cables and shift them away from the current position. This would ensure that the cables do not get sandwiched between the frame, the center stand and the mounting plate, and get damaged in the process.
Attach the stand: If your bike has a mounting plate between the chainstays, attach the stand with an M10 bolt. Tighten the bolt until it feels secure, but don't overtighten it. You can use a locking agent like Loctite to prevent the bolt from loosening.
If you're unsure about the installation process, you can consult your local bike shop.