22April2025 Mother Earth Day "Our Power, Our Planet": Express your gratitude to Mother Nature and seek her blessings by riding a Solar Assist Bicycle!

BEM® BHOOMEE™ ELECTRIC KIT FOR RETROFIT ON 26" BICYCLE:
Kit consists of 250W BLDC Motor, 36V, 5.2Ah Battery with Soft Cover, Full size Rotary Hand Throttle Grip, Pedal Assist Sensor, Motor Controller, Headlight cum Horn Unit, Tail Parking light cum Brake light - LED strip module, 2" LCD Display, Switch Key Lock, 230V AC to 42V, 2A DC Charger - for

₹ (15,990*) (all incl.)!

*= terms and conditions apply

BEM® BHOOMEE™ ELECTRIC KIT FOR RETROFIT ON 26" BICYCLE

BEM® Bhoomee™ - BEM's Electric retrofit on Tata® Stryder-Rower™ Bicycle

AC to DC Charger

230V AC to 42V DC, 2A Charger

Input Voltage: 170 - 280 Volts, 50 Hz AC
Input Current: < 1 Amps (Max.)

Output Voltage: 42 Volts DC (Max)
Output Current: 2 Amps (Max.)

Indicators:
MAINS : LED always RED when input ac mains switched on

BATTERY : LED when RED : indicates Charging State
LED when GREEN: indicates Fully Charged State.

BEM® Bhoomee™ ELECTRIC KIT

Complete Kit to convert a simple bicycle to an electric bicycle ( Kit consists of 250W BLDC Motor, 36V, 5.2Ah Battery with Soft Cover, Full size Rotary Hand Throttle Grip, Pedal Assist Sensor, Motor Controller, Headlight cum Horn Unit, Tail Parking light cum Brake light - LED strip module, 2" LCD Display, Switch Key Lock, 230V AC to 42V, 2A DC Charger)
Lowest cost in the (BLDC Motor + Li-Ion Battery+ 2" Display) category
Ideal for trip distances less than 20 km in pedal-assist mode or 10 km in throttle mode
Charging time from AC mains: < 2 hours
Simple to assemble

BEM® Bhoomee™ - BEM's Electric retrofit on Tata® Stryder-Rower™ Bicycle

Once the LCD Panel is ON and lit, you may press on the power button to select one of the following 4 display modes:

Odometer
Trip km
Battery Voltage
Time Elapsed

USER'S MANUAL

Unlock the Cable Lock.
Insert the Key into the Electric Switch and twist clockwise to turn ON
Press the Power Button located along the left edge of the LCD Display, and keep it pressed for a few seconds till the LCD lights up (see image alongside)
To begin your ride in the Pedal Assist mode, step on the pedal. After acquiring the desired speed, press the '+' button to increase the level of Pedal Assist that suits you. To lower down the pedal assist level press on the '-' button.
To begin your ride in the Throttle mode, simply twist the throttle handle in an anti-clockwise direction. Keep the throttle position steady for about 10 seconds to enter the cruise mode - to cruise at a steady constant speed. The LCD Panel will display 'P' to confirm entry into 'cruise mode'. To exit cruise mode, simply rotate the pedals forward, or apply any of the two brakes or twist the throttle once again.

Odometer (reads 00000 km)

Trip km (reads 000.0 km)

Battery Voltage (reads 41.2 Volts)

Time Elapsed MM:SS (reads 02:33)

Pedal Assist Level 1

Pedal Assist Level 5

Brake symbol with ! mark indicating either of the 2 Brake Levers pressed

Cruise Control (P) Mode - Hands Free from Throttle, Speed steady at 24.9 km/h

Salient Features of BEM® Bhoomee Bicycles :

A 2 inch LCD Display that displays the Speed, Odometer - Total Distance covered in km, Trip Distance in km & battery charge status.
A 5 speed PAS (Pedal Assist) control that gives the rider an ability to choose the level of assistance that is needed from the battery while pedalling.
Cruise Control: After twisting / rotating the throttle handle by a fixed degree and by maintaining a steady speed for a time duration greater than 5 seconds, the motor controller would enter the 'Cruise Control' mode (indicated accordingly by a symbol 'P' on the LCD Panel). Thereafter, the rider is free to release the throttle handle while the motor controller takes over the function of maintaining the set speed or 'cruise control mode'. The motor controller would exit the cruise control mode when any of the following conditions get satisfied: (a) Any of the brake levers are pressed, or (b) The Throttle handle is again rotated, or (c) The Pedals are rotated.
A Strip LED Tail Parking Light and Brake Light mounted on rear for safety. Tail Parking light goes ON when switch is turned ON, regardless of whether day / night, for safe riding in all weather conditions. When brakes are applied, bright brake light goes ON with increased lumen output for better visibility and increased safety.
Detachable plug and socket arrangement for the Hub motor for easy wheel removal in case of tyre replacement or puncture repairs.

Powerful Brake Light - for Safety

Tail (Red) Parking Light - for Safety

Front Suspension - For comfort

Cargo Safety - Blue (Lexan) Cargo Guard Plates

Three Operation Modes in BEM® Bhoomee Bicycles :

Throttle Mode: Switch ON the Power by turning the key clockwise. Gently rotate the throttle handle anticlockwise to accelerate. Retain the position of handle rotation to cruise at the desired speed. Let go off the handle to allow it to get back to the original (zero) position to cut off battery supply to the motor and free wheel - cycle continues to move due to inertia. With a 5Ah Battery one can cover a distance of 15 to 20 kms in this mode
Pedal Assist Mode (PAS): Switch ON the Power by turning the key clockwise. Do not use the Throttle handle. Instead press your foot on the pedal. The Pedal Assist Sensor (PAS) will detect your pedalling speed and assist manual power with battery power. The PAS mode allows you to travel the same distance with less manual effort. Battery gets drained less in the PAS mode in comparison to the Throttle mode, thereby enabling one to cover larger distances. With a 5Ah Battery one can cover a distance of 25 to 30 kms in this mode.
Manual Pedal Mode: Switch OFF the Power by turning the key anti-clockwise. This would disable both PAS and Throttle modes. The bicycle gets transformed back to a human powered, pedal driven one. This mode is particularly useful to safely return back home, when you run out of battery power. The 5Ah Battery does not get drained in the manual pedal mode.

Tip: Apply brakes only when needed. Applying brakes unnecessarily wastes energy.

Big 2 inch LCD Display - for better clarity

Powerful Head Light & Horn for Better Visibility & Safety

Powerful 250W BLDC Motor

Disk Brake - Rear - for reliable braking action & Safety

Specifications:

Maximum Distance per day: A BEM® Bhoomee Bicycle with a fully charged battery, can cover a distance of 10 kms in Throttle mode, and 25 kms in Pedal Assist (PAS) Mode.
Maximum Speed: The maximum speed is limited to 30 km/ hour to comply with bicycle lane safety regulations.
Time taken to Charge the Battery: Typically takes 2 hours to charge a fully discharged battery
Time taken for Battery Discharge: Typically takes 1 hour to discharge a fully charged battery at maximum speed.

Disk Brake - Front - for reliable braking action and Safety

Key Lock on Throttle Handle for Electrical Cut Off & Security

Light and Horn Switches

Water Bottle Fixture with Bottle - to quench thirst

BEM® Bhoomee™ ELECTRIC ON TATA® STRYDER ROWER™ Bicycle configuration:

An Electric Retrofit over a brand new 26" bicycle model, designed for any gender (male or female), MTB - Tata® Stryder Rower™.
Front Shocker/Suspension instead of rigid front suspension and dual disc brakes instead of normal brakes, and with rear integrated carrier.
26x17 TIG Welded Steel Frame, 26" x 2.125" tyres
180 Wh, 36V, 5.2 Ah Lithium Ion Battery with Manufacturer's Warranty.
Powerful BLDC HUB Motor: 36V - 250 Watt Motor, centrally placed for easy balancing while riding. Brush-less motor means longer life
Motor Controller: 36V, 12 Amp
Throttle Handle - Full size, Right side for anticlockwise rotation
Key Lock to Switch ON Motor Controller + matching pair of keys
AC to DC Charger , Input: 230V, 0.5A; Output: 42V, 2A through 2.1 x 5.5 mm DC plug; with LED indicators with Warranty.
Big (2 inch) LCD Display that displays numerous ride related parameters such as:
- Battery symbol indicating balance charge
- Battery voltage - for finer charge level indication
- Speedometer - for current speed of bicycle
- Odometer for total distance travelled
- Trip km for distance covered during the current trip
- Time for time elapsed since commencement of trip
- Pedal Assist Levels ranging from 1 to 5
- Cruise control - for travel at a constant speed without need for keeping throttle handle rotated.
- Brake Symbol - if either brake lever is pressed
- Error conditions if any (for easy fault detection)
Buttons on LCD Cluster
- ON/OFF Button - Keep pressed for 3 seconds to switch on the electric supply (to motor and other circuits). Press again to switch off.
- '+' Button - To increase the Pedal Assist Level (Maximum Level : 5)
- '-' Button - To decrease the Pedal Assist Level (Minimum Level : 5)
Head-light - Powerful High intensity LED Light when 'Light' button is in ON State.
Rear Red Brake Light - High Intensity LEDs to warn vehicles behind whenever brakes are applied, for safety.
Rear Red Tail Parking Light - Separate set of LEDs can be kept continuously ON during day or night by pressing 'Light' button in ON State for safety.
Horn - Beeps whenever 'Horn' push button is pressed
Handle mounted Switch Cluster - conveniently placed to operate Light or Horn
Rigid plastic box for Motor Controller - protects controller.
Rear View Mirror - To view the traffic behind you or overtaking you.
Thicker 26 inch Spokes for rear Rear wheel
Pedal Assist Sensor (PAS) for Pedal Assist mode
Water Bottle + Carrier Clip
Wire cable lock for Bicycle + matching pair of keys
Warranty of 12 months for motor and controller.
Gross Weight: 25 kgs

Front and Rear Mud Flaps - for your cleanliness

Sleek and Elegant Looks

Strong Side Stand
Easily Adjustable Seat Height

Battery securely harnessed with the main post.

KE 26T

SKU: 6115010695

Description: UNASSEMBLED ELECTRIC KIT FOR 26" MTB BICYCLE

Maximum Retail Price MRP (inc. GST) : ₹20,000 Special Ex-Works (ExW) Discounted Price : ₹ 15,228.57 (+ 18% GST) or

ExW Sale Price: ₹ 17,970 (incl. of all taxes)

HSN Code: 87116090

Description: ASSEMBLED ELECTRIC KIT FOR 26" MTB BICYCLE

Maximum Retail Price MRP (inc. GST) : ₹(20,000 + xxxxx)

Special Ex-Works (ExW) Discounted Price : ₹ (15,228.57 + yyyyy) (+ 5% GST) or

ExW Sale Price: ₹ (15,990 + zzzzz) (incl. of all taxes)

HSN Code: 87116090

KE 26T ROWER DD IC is one of a kind, the road beast is the perfect example of masculinity and style. With trapezium tubing MIG welded frame, Dual disc brakes with alloy levers, chain Wheel with plastic guard, plastic body reflectorized pedal and all the modern features that a super cycle must have. This beast roars masculinity and class.

Accessories

Water Bottle with Cage

BB Fitting

Cottered BB Axle

Brake Levers

Half Alloy

Brakes

Disc brakes

Crank Set

Cottered Chain wheel set with guard

Fork

Threaded Suspension Fork

Frame

26x17 TIG Welded Steel Frame with Normal decals

Freewheel

18 Teeth Full Ball

Handle Bar

Steel MTB Type Lo-Rise Handle Bar

Headset

Threaded Oversize Headset , ED Black

Pedal

Plastic Body reflectorized

Rim

Steel Rim

Saddle

PU Padded with Quick Release

Tyre & Tube

26X2.15 Tyres

Transmission

Single Speed

Bike Assembly

100% (Fully) Assembled

Range/Charge

Range (Pedal assist) < 30*Kms | *Under ideal ride conditions

Battery Placement

External | Removable

Hub

Steel

Battery

36V (Li-ion) | 5.2Ah

Charging time

4*Hours

Display

2 inch LCD Display

Max speed (Without Pedal)

< 30*Kmph

Motor

250W BLDC Hub Motor

Tata® Stryder-Rower™ Bicycle (Black+Cyan)

Tata® Stryder-Rower™ Bicycle (Grey+Green)

Tata® Stryder-Rower™ Bicycle - Colour : Black + Cyan

Tata® Stryder-Rower™ Bicycle - Colour : Grey + Green

Buy Options

1. Buy at Factory Outlet (Best Price)

Ex-Works (EXW) Discounted Price (inc. GST) :

₹15,990

Save on Shipping + Packaging + Courier charges + E-payment gateway transaction/ convenience fee and purchase the product directly from the works at the Special Ex-Works (EXW) Discounted Price indicated above.

UPI

Pay using Unified Payment Interface (UPI) to our Virtual Payment Address (VPA)

bem@cnrb

QR Code

NEFT

Pay using National Electronic Funds Transfer (NEFT):

Name of the Bank: CANARA BANK

Branch : Station Road, ANAND - 388001 GUJARAT

A/c No. : 71131010000030

IFSC Code: CNRB0000163

A/c Name: BARODA ELECTRIC METERS LIMITED

A/c Type : CURRENT Account

Share on WhatsApp

STRYDER - a TATA product.

Manufactured By: Stryder Cycle Pvt Ltd, Property no.1838, B3 to B8 & A-4 Focal Point, Ludhiana, Punjab -141010

Page updated

Report abuse